EXPERTISE // LABORATORIES // TESTING STANDARDS

Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

 
This specification covers deformed and plain stainless steel bars for concrete reinforcement proposed to be used in applications requiring corrosion resistance or controlled magnetic permeability. For each specimen, one tension test, one bend test, if required, and one set of dimensional property tests shall be made. For martensitic materials, two hardness tests shall be performed per lot of material. If the results of the test fail to meet the specified minimum requirements, a retest shall be permitted on two random specimens for each original tension specimen failure from the lot. If a specimen fails a bend test due to reasons other than mechanical or flaws, a retest shall be permitted on two random specimens from the same lot.
WJE laboratories are accredited by ANAB (ISO/IEC 17025) to perform testing standard ASTM A955 for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement. Contact us to learn more.
Keywords
ASTM A955 - Bars, Rods, and Rebars - Corrosion Resistance - Magnetic Permeability - Reinforcement
ICS CODE
77.140.60 (Steel bars and rods)
UNSPSC CODE
30103623 (Reinforcing bar or rebar or mesh)
CITATION FORMAT
ASTM A955 / A955M-19, Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement, ASTM International, West Conshohocken, PA, 2019, www.astm.org